Tembleque (Puerto Rican Coconut Pudding) Recipe

This thickened not-to-sweet coconut dessert is scented with cinnamon and the subtle undertone of lime. Tembleque (tehm-BLEH-kay), from the Spanish temblar, which means “to shake,” describes this wiggly coconut dessert to a tee. It’s poured into a mold and shaped. It’s similar in texture to Jello. (Even though we consider it a pudding, which I know doesn’t make any sense.)

You can make this simple cinnamon-flavored coconut custard in about 20 minutes. Just let it chill for a few hours and enjoy it as a snack, a special treat or a mid-day pick-me-up.

Side view of a coral plate with Puerto Rican panna cotta in the shape of a bundt pan. Ground cinnamon is sprinkled on top. A small white bowl of toasted shredded coconut is behing the plate, as well as a striped dish towel. To the left of the toasted coconut is a light yellow plate with another panna cotta in partial view.


Because I truly believe that my late Abuela Leria is reading this from beyond the grave, freshly extracted coconut milk from a real coconut is the best type of milk to use in tembleque. However, because we are all busy people and coconuts don’t always fall out of the trees in our neighborhoods, canned, full-fat coconut milk is the next best option. Sorry, Grandma.

Canned coconut milks are available in abundance, but because tembleque is supposed to be as white in appearance as possible, it’s best to use a coconut milk with the least number of additives in it. While I haven’t researched this theory in depth, my personal experience is that the more additives and preservatives the coconut milk contains, the greyer in color it is.

Thai Kitchen’s coconut milk is the closest to fresh coconut milk, in my opinion, so that’s what I prefer to use.

You’ll find that most canned coconut milks (especially the organic ones) need to be stirred before using. If yours has a layer of viscous liquid underneath a thick cap of white coconut fat, whisk the two together before pouring it into the sugar mixture.

Most important: Use full-fat coconut milk. Light coconut milk won’t give your tembleque the same body or mouthfeel that you’re looking for. The watery stuff in the refrigerated section should also be avoided for the same reason.


Tembleque can be poured into large molds for sharing, but if you’re a non-sharer, like me, individual molds for hoarding this pudding all to yourself are better.

  • If I plan to serve tembleque to a crowd, and I know we’ll demolish it one sitting, I pour the hot mixture into a large decorative bundt pan. This pan is my favorite.
  • When I’m serving tembleque to my family, I use these smaller, individual molds. The smaller molds accommodate our varied dessert-eating schedules without exposing the cut tembleque to the cold, refrigerated air.

Don’t feel like fussing with the unmolding process? Don’t! Eat it straight from the pan – YOLO, right?!?

Switching up the size of the mold is no biggie, but I prefer to use metal molds because the dessert chills faster. If you don’t have access to individual molds, you can also use a regular bundt pan or cake pan! Just refrigerate it for five to six hours, or until firm.

Vertical photo of two plates with coconut pudding and gold forks. The coconut pudding is coated in ground cinnamon. The lower plate is light yellow and the plate in the upper right is coral. A small container of toasted shredded coconut is to the left of the coral plate. A striped dish cloth is underneath the coconut.


Tembleque is ready to be unmolded when the custard feels slightly firm and springy when pressed with your fingers. The mold should feel very cold to the touch as well. Both are signs that the custard is completely chilled and has set up properly.


When it’s time for the big reveal, the inverted tembleque should emit a “SCHLOOP!” sound when it releases onto a plate. That glorious sound will let you know your custard is ready to be “ooh’d and ahh’d” over.

Here are a few tricks to make sure the tembleque unmolds easily:

  • Rinse the inside of the mold in cold water before pouring the warm tembleque custard into it. This thin layer of moisture creates a tasteless barrier between the mold and the custard that will assist with unmolding after the tembleque has firmed up.
  • When the custard is properly set up, gently pulling the custard from the mold with your fingertips (recommended if you’ve used a decorative mold) or running a thin knife between the tembleque and the mold will loosen it further.

Homemade bundt shaped templeque is on a coral plate with a gold spoon set on the left side. The tembleque has toasted, shredded coconut mounded in the center and a section of the pudding is missing. Behind the plate is a striped dish towel, small white container and yellowl plate all in partial view.


Why didn’t my tembleque set up? What went wrong?

Tembleque is thickened with cornstarch, which is a very forgiving thickener. If, for some reason, an excess of water gets whisked into the custard as it cooks, it will inhibit the thickening. This may also happen if you’ve purposely added more sugar than is called for to the mixture.

THE SOLUTION: Create a slurry of equal parts cold water and cornstarch (one tablespoon of water to one tablespoon of cornstarch) and slowly whisk it into the cooking custard. Allow the tembleque to cook until it thickens.

What if I can’t get them out of the molds?

If you find your molds aren’t releasing within a minute of inverting them, we can fix that.

THE SOLUTION: Flip them back over and set them in a shallow dish partially filled with hot water for five to ten minutes. The heat from the water will warm the mold and release the tembleque.

If some, by some crazy twist of fate, the tembleque still won’t schloop from the mold, just take a spoon to it, eat it straight from the mold, and call it day.

Side view of a glass milk jar with coconut milk insdie. A whole lime and a glass jar of cinnamon sticks are to the right of the milk. Behind the milk are two small glass containters with white ingredients inside.


  • Swap out the coconut milk: If you don’t enjoy a strong coconut flavor, you can replace one can of coconut milk with one can of evaporated milk. Or replace all the coconut milk with evaporated milk.
  • Swap the sugar: A caramel flavor can be mimicked by using brown sugar instead of white sugar.
  • Swap the citrus: I used lime peel in this recipe, but you can use any type of citrus peel.
  • Use an extract: One of the original tembleque recipes, written by Carmen Aboy de Valldejuli (she’s basically the Julia Child of Puerto Rican cooking), uses orange blossom water. You can go the original route and stir in orange blossom water instead of the vanilla extract. In fact, there’s also a whole host of extracts that can be used in place of the vanilla.


I stick to the basic decoration when it comes to prettifying my tembleque:

  • Dust with ground cinnamon
  • Sprinkle with toasted, sweetened coconut flakes
  • Or, do what I do, and sprinkle BOTH over it!


Yes! In fact, you should make it at least four hours in advance of unmolding because tembleque needs time to chill and develop its trademark jiggle. Tembleque will keep in its mold refrigerated, overnight (or up to 12 hours).

Beyond that, it’s best if you unmold it and cover with a layer of plastic wrap. If you find you have leftover custard, wrap it snugly in plastic wrap to keep it from becoming gummy and hard.


Source link

Post Author: admin

Leave a Reply

Your email address will not be published. Required fields are marked *